Photoquip Online
Photoquip Online

X-T3

Sensor

APS-C “X-Trans CMOS 4″

Effective Pixels

26M

LCD Monitor

3.0-inch

Sensitivity

ISO 51200

Performance

X-Trans CMOS 4

The First X Series model featuring a new back-illuminated sensor

The FUJIFILM X-T3 features a newly-developed back-illuminated “X-Trans CMOS 4” sensor, the fourth generation to feature in the X Series. Boasting a resolution of 26.1MP, the sensor uses a unique colour filter array, synonymous to X-Trans CMOS sensors, to control moiré and false colour without the use of an optical low-pass filter. Its back-illuminated structure enhances image quality while maintaining a high S/N ratio. Furthermore, ISO160, previously available only as extended ISO, is now part of the normal ISO range, allowing you to achieve incredibly clean, noise free images.

Maximum AF speed

0.06sec

Shooting interval

0.17sec

Shutter release time lag

0.045sec

Start-up time

approx 0.3sec

Maximum continuous shootiing speed

30fps

Shutter release time lag

100fps

Viewfinder

X-Processor 4

The brain that utilizes the full potential of the X-Trans CMOS 4 sensor

The FUJIFILM X-T3 uses the X-Processor 4, an evolved version of X Series’ image processing engine that boasts advanced processing capabilities. The new processor, combined with a new algorithm, enhances the Film Simulation modes, substantially improving the camera’s ability to track moving subjects, boosts AF’s speed and accuracy, and allows for a more diverse range of video functions. It maximizes the full potential of X-Trans CMOS 4 sensor to deliver the highest performance in all aspects in the history of X Series.

Large EVF means you’ll never lose sight of your subject

The FUJIFILM X-T3 features a 3.69-million-dot high resolution EVF with a high magnification ratio of 0.75x. The display time lag of just 0.005 seconds and refresh rate of approx. 100fps ensure smooth display and allows you to precisely identify subject movements and focus positions.

Blackout-free high-speed continuous shooting of up to 30 fps with AF/AE tracking

Increased read speed from the sensor and the new high-speed processor have made it possible to have AF/AE-tracking, blackout-free continuous shooting of up to 30 fps in approx. 16.6M (1.25x crop) mode using the electronic shutter, while maintaining a smooth Live View of 60fps to track your subject. The rolling shutter distortion, a typical issue for electronic shutters, has been halved compared to the previous generation.

Sports finder mode for enhanced shooting

The “Sports finder mode” makes it even easier to capture moving subjects. The new mode marks a cropped area in the viewfinder and shoots at approx. 16.6M (1.25x crop). This is particularly useful for sports and wildlife photography, as you can check the movements of a subject just outside the shooting frame and take advantage of shorter-than-usual blackout time as compared with the mechanical shutter.

Colours

Film Simulation modes for a variety of color tones and gradations

The FUJIFILM X-T3 offers 16 Film Simulation modes so that you can match your true photographic intention in a similar way to how photographers used to choose purpose-specific photographic films. This unique philosophy reflects Fujifilm’s heritage and colour science know-how, nurtured by over 80 years of film manufacturing.

PROVIA/STANDARD

Velvia/VIVID

ASTIA/SOFT

CLASSIC CHROME

PRO Neg.Hi

PRO Neg.Std

ACROS (+Ye / R / G FILTER)

ETERNA

MONOCHROME

Cutting-edge monochrome expression for the digital age

The FUJIFILM X-T3 offers the new “monochrome adjustment” function to faithfully reproduce warm and cool tones which were conventionally achieved using specific photographic papers and developers. This function, available in the standard “Monochrome” as well as the “ACROS” mode, provide smooth halftones, deep blacks, and beautiful textures to broaden the scope of monochrome expression.

ACROS cool

ACROS

ACROS warm

Color Chrome effect for high saturation subjects

This effect produces deeper colours and gradation in subjects with highly saturated colours present in vivid and shaded flowers, which are notoriously difficult to photograph.

Color Chrome Effect OFF

Color Chrome Effect ON

Autofocus

Fast and accurate phase detection AF across the frame

The FUJIFILM X-T3’s sensor has increased the phase detection AF area to the entire frame (approx. 100%) with 2.16M phase detection pixels. The low-light AF sensitivity has also been extended from -1EV to -3EV, enabling high-speed AF in even lower light conditions, like a scene lit only with candlelight.

Enhanced AF processing for moving subject

The X-Processor 4’s high processing speed and improved phase detection algorithm means the camera refocuses (AF) and meters (AE) about 1.5 times more frequently than current models to improve autofocus even when shooting sports involving fast and erratic movements across the frame.

Substantially improved performance with face- and eye-detection AF

The performance of face-detection AF on a moving person has been doubled. The eye-detection AF works in AF-C mode, maintaining accurate focus-tracking with portraits. It focuses precisely when shooting people from the front or side.

11fps continuous shooting with camera body only

Continuous shooting of 11fps with the mechanical shutter no longer requires the optional vertical grip.

Movie Recording

4K/60P 10bit HDMI output and internal SD card recording

The FUJIFILM X-T3 is our first model that features 4K/60P 4:2:2 10bit HDMI output and 4K/60P 4:2:0 10bit internal SD card recording. Supported video formats include the widely-used H.264/MPEG-4 AVC as well as H.265/HEVC for greater data compression. This enables 200Mbps bitrate recording when shooting 4K/60P 4:2:0 10bit. Video compression options available are ALL-Intra and Long GOP. When using ALL-Intra, video is recorded at 400Mbps.

Enhanced ISO performance for a wider scope of video expressions

The introduction of a new noise reduction process and new “4K interframe NR” function have reduced noise at ISO12800 by the equivalent of approx. 2 stops. The NR process has a greater level of noise-identifying accuracy for appropriate denoising performance. The 4K interframe NR function uses differential data between adjacent frames to reduce noise even further. Furthermore, the minimum sensitivity for shooting F-Log and with the setting of DR400% footage has been extended from ISO800 to ISO640.

Equipped with Hybrid Log Gamma video recording and simultaneous output of Film Simulation and F-Log footage

The X-T3 supports Hybrid Log Gamma (HLG) video recording which is one of the formats defined in the ITU-R BT.2100 international standards. HLG allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high colour saturation. Simultaneous output of Film Simulation and F-Log footage is also available with the X-T3 allowing you to record in F-Log while previewing the footage with a Film Simulation applied, via an external monitor.

SDR Image (Left), HDR Image (Right)

Greater freedom of gradations with 10bit color depth

The FUJIFILM X-T3’s 10bit colour depth has 64 times the colour information versus an 8bit depth system. With the wide dynamic range of 400% (approx. 12 stops), it enables gradation-rich video recording when applying “ETERNA”, characterized by subdued colour and rich shadow tones, or “F-Log,” which is a gamma curve option with an even wider dynamic range.

Simultaneous output of 4K HDMI and internal SD card recording

The FUJIFILM X-T3 supports 4K/60P 4:2:2 10bit HDMI output and 4K/60P 4:2:0 10bit internal SD card recording simultaneously. This allows you to take backup video or conduct 4K/60P internal SD card recording while monitoring 4K/60P footage. Also, the sensor’s read speed is about 1.5 times faster than current models, which enables fast 17msec reading of 4K/60P video. The rolling shutter distortion has been reduced for even smoother filming of fast-moving subjects.

Movie Recording Mode

Design / Operability

Design inherits FUJIFILM X-T2’s philosophy

The FUJIFILM X-T3 inherits FUJIFILM X-T2’s popular design features such as the positioning of dials on the top panel, central viewfinder style for added sense of stability, and excellent grip design for comfort.

Silver as standard colour

The silver colour is lineup as standard, which features more classical tone compared with graphite silver, limited edition for previous models. Its styling that reminds you of traditional film cameras is combined with outstanding practicality, making it photographic equipment that is a pleasure to own for many years to come.

Lockable EVF’s diopter adjustment dial

EVF’s diopter adjustment is lockable achieved by pulling out and rotating a diopter knob, so as to prevent unintended adjustments while carrying the camera.

Touchscreen panel tilts in 3 directions

The FUJIFILM X-T3 uses a touchscreen panel with higher contrast, wider viewing angle and better operability than those in previous models to enable intuitive operation.

Improved dials and buttons

The FUJIFILM X-T3 inherits FUJIFILM X-H1’s features such as large top-panel dials / rear-panel buttons and comfortable clicking touch of front and rear command dials.

Terminal with high expandability

A headphone jack is provided on the camera body so that all accessories required for video recording, such as microphone and HDMI devices can be centrally connected to the body for added mobility in videography. Also, the terminal cover is removable, and USB terminal supports USB-Type C (USB3.1 Gen1) specification.

System

Workflow software

By installing compatible software on your computer, it is possible to build an all-in-one workflow for things like “tethered shooting – checking the image – RAW development preview – RAW development”. In addition to FUJIFILM’s own software, you can use software that you are already familiar with. You can carry out tethered shooting by connecting the FUJIFILM X-T3 via USB cable or Wi-Fi connection through wireless LAN access point. Also, RAW files can be developed based on Film Simulation settings

Capture One Pro / Capture One Pro FUJIFILM (Optional)

Capture One Pro FUJIFILM is workflow software that inherits the versatile and powerful editing capabilities of Capture One Pro but is specifically designed for the GFX and X Series of cameras. It is available to purchase from Phase One’s website. The Capture Pilot function allows you to connect the camera to a table device, etc. and view/check an image being captured wirelessly on such devices.

For more detail »

Capture One Express FUJIFILM

This software supports RAW conversion for files from the GFX and X Series range of cameras. The software uses a unique cataloging format to manage pictures, enabling fast processing of individual images regardless of the quantity or size. FUJIFILM’s unique Film Simulation modes can be applied during RAW conversion so that you can add an artistic flair or traditional film look and feel. This RAW conversion software is available as a free download from Phase One website.

Download Capture One Express FUJIFILM »

FUJIFILM X Acquire + RAW FILE CONVERTER EX 3.0 powered by SILKYPIX

The FUJIFILM X-T3 uses the X-Processor 4, an evolved version of X Series’ image processing engine that boasts advanced processing capabilities. The new processor, combined with a new algorithm, enhances the Film Simulation modes, substantially improving the camera’s ability to track moving subjects, boosts AF’s speed and accuracy, and allows for a more diverse range of video functions. It maximizes the full potential of X-Trans CMOS 4 sensor to deliver the highest performance in all aspects in the history of X Series.

Download FUJIFILM X Acquire»

Download RAW FILE CONVERTER EX3.0 powered by SILKYPIX»

FUJIFILM Tether Shooting Plug-in PRO + Adobe® Photoshop® Lightroom® Classic CC

FUJIFILM X RAW STUDIO

This is unique RAW development software from FUJIFIILM. By connecting a computer installed with X RAW STUDIO and camera via USB cable, the processor in the camera can be used to process RAW files. Processing time will not be affected by any limitations of your computer, and there is no difficulty in batch processing large number of images. Since it offers an optimized environment for the X Series, you can get complete image quality includes tone, color reproduction, and Film Simulations.

Download FUJIFILM X RAW STUDIO »

Wireless communications

The FUJIFILM X-T3 can be constantly paired to a smartphone or tablet device through Bluetooth connection for automatic transfer of captured images.